ADSP-BF533SKSTZ-5V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.5mm |
| Frequency | 533MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF533 |
| Pin Count | 176 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 148kB |
| Number of I/O | 16 |
| RAM Size | 64kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.25V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF533SKSTZ-5V Overview
The 176-LQFP package contains these electronic components.The packaging way is Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The machine is mounted in the way of Surface Mount in order to facilitate its operation.The operation of the device at the temperature of 0°C~70°C TA ensures the normal operation of the device.Voltages can be input or output within 1.8V 3.3V's analog voltage range.This digital signal processor is included into the Blackfin? series.There are 176 terminations for its uses.The voltage supplied by 1.25V is used to operate it.Pins are available on the 176 component.The configuration of the device includes 176 pins.The base part number ADSP-BF533 can be used to identify many associated parts.The device operates at the frequency of 533MHz in accordance with a specific design.Surface Mount is used as the mounting method.According to its specific characteristics, this device is classified in the subcategory Microprocessors.Devices like this can be powered with as little as 800mV volts.This device can handle a maximum voltage of 3.6V.148kB data can be stored in the memory of this device.Data format and transmission speed can be configured for asynchronous serial communication on 1 UART channels.Time and external events are measured and counted with 4 timers/counters.The architecture of this processor core is Blackfin.It is equipped with 16 I/Os.
ADSP-BF533SKSTZ-5V Features
Supplied in the 176-LQFP package
4 timers/counters
16 I/Os
ADSP-BF533SKSTZ-5V Applications
There are a lot of Analog Devices Inc. ADSP-BF533SKSTZ-5V DSP applications.
- Smart camera
- Infinite impulse response filters
- Automobiles
- Other sensor array processing
- Digital hardware
- Computer vision technology
- Signal processing for telecommunications
- Biomedical treatment
- Vibration signal processing
- Biomedical engineering
