ADSP-BF534BBC-4A
| Parameters | |
|---|---|
| Contact Plating | Lead, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 182-LFBGA, CSPBGA |
| Number of Pins | 182 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 182 |
| Type | Fixed Point |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF534 |
| Pin Count | 182 |
| Qualification Status | Not Qualified |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 400 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.20V |
| Clock Rate | 400MHz |
| Height Seated (Max) | 1.7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-BF534BBC-4A Overview
Basically, it is a type of electronic component that is available in a 182-LFBGA, CSPBGA package.There is a packaging method of Tray provided with it.The fact that it belongs to the Fixed Point family means that it can be applied to a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.2.50V 3.30V refers to the range of analog voltages that can be input or output.The Blackfin? series contains this digital signal processor.In order to use it, it has 182 terminations.1.2V is the supply voltage.There are pins on the 182 component.In its configuration, there are 182 pins.Several related parts can be identified using its base part number, ADSP-BF534.It is specifically designed to operate with the frequency of 500MHz.Using Surface Mount as a mounting method, it is mounted.This device falls into the subcategory of Microprocessors based on its specific characteristics.It is possible to supply as low a voltage as 800mV to this device.This device can be powered by 3.6V voltages.Its memory is capable of storing 132kB data.Data format and transmission speed are configurable on 2 UART channels for asynchronous serial communication.Time and external events are measured and counted with 9 timers/counters.A Blackfin-architecture processor core is used here.48 I/Os are included with the device.
ADSP-BF534BBC-4A Features
Supplied in the 182-LFBGA, CSPBGA package
9 timers/counters
48 I/Os
ADSP-BF534BBC-4A Applications
There are a lot of Analog Devices Inc. ADSP-BF534BBC-4A DSP applications.
- TVs
- 3D tomography and imaging processing
- Boats
- MP3 audio player
- Radar
- Receivers
- Automatic analysis system of EEG or ECG
- Digital image processing, data compression
- Voice recognition
- Processing system
