ADSP-BF534BBCZ-5B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-FBGA, CSPBGA |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF534 |
| Pin Count | 208 |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.26V |
| Number of SPI Channels | 1 |
| Height | 1.36mm |
| Length | 17.1mm |
| Width | 17.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF534BBCZ-5B Overview
An electronic component available in package 208-FBGA, CSPBGA.Tray packaging is provided for it.Due to its Fixed Point membership, it is ideal for a wide range of applications.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.This refers to the analog voltage range that can be input or output from 2.50V 3.30V.This digital signal processor is part of the Blackfin? series.Its uses have 208 terminations.It works with a voltage of 1.2V as a supply voltage.Pins are available for 208 components.The configuration of this board includes 208 pins.The base part number ADSP-BF534 allows identification of a wide range of related parts.It is specifically designed to operate with the frequency of 500MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.According to its specific characteristics, this device is classified in the subcategory Microprocessors.800mV is the minimum voltage that can be supplied to this device.Devices like this can be powered by voltages up to 3.6V.Its memory can be used to store 132kB data.Data formats and transmission speeds are configurable for 2 UART channels used for asynchronous serial communication.Counting external events and measuring time are done by 9 timers/counters.Blackfin-architecture is used in this processor core.The device has 48 I/Os.FLASH is the type of memory it uses.The embedded system uses short-range 1 SPI channels for communication.
ADSP-BF534BBCZ-5B Features
Supplied in the 208-FBGA, CSPBGA package
9 timers/counters
48 I/Os
ADSP-BF534BBCZ-5B Applications
There are a lot of Analog Devices Inc. ADSP-BF534BBCZ-5B DSP applications.
- Fourier transform
- Statistical signal processing
- Automatic analysis system of EEG or ECG
- Speech processing and recognition
- Voice recognition
- Automobiles
- Consumer electronic gadgets
- Vibration signal processing
- Dam design
- Image signal processing
