ADSP-BF536BBCZ-3A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 182-LFBGA, CSPBGA |
| Number of Pins | 182 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 182 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF536 |
| Pin Count | 182 |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 800mV |
| Memory Size | 100kB |
| Number of I/O | 48 |
| Speed | 300 MHz |
| RAM Size | 32kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 2 |
| Number of PWM Channels | 8 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.20V |
| Clock Rate | 300MHz |
| Number of Ethernet Channels | 1 |
| Height | 1.31mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF536BBCZ-3A Overview
This is an electronic component with a 182-LFBGA, CSPBGA package.There is a packaging method of Tray provided with it.With its association with Fixed Point, it is suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.In analog circuits, the analog voltage range 2.50V 3.30V represents the voltage range that is available for input or output.It is a part of the Blackfin? series of digital signal processors.Its uses have 182 terminations.1.2V is the supply voltage.Pins are available for 182 components.There are 182 pins in its configuration.Several related parts can be identified using its base part number, ADSP-BF536.This device is designed specifically to operate at frequency 400MHz.A Surface Mount mounting method is used for its mounting.This device falls into the subcategory of Microprocessors based on its specific characteristics.The minimum voltage supplied to this device is as low as 800mV.The maximum voltage for this device is 1.32V.Its memory is capable of storing 100kB data.The 2 UART channels are configured to support asynchronous serial transmissions of data in a format and speed that can be configured.To measure time and count events externally, 9 timers/counters are used.Processor core Blackfin adopts the Blackfin architecture.A 48 I/O interface is present on the device.Memory type ROM is used by it.For controlling analog circuits with digital means, there are 8 PWM channels.Different types of network cables can communicate with each other over 1 Ethernet channels.
ADSP-BF536BBCZ-3A Features
Supplied in the 182-LFBGA, CSPBGA package
9 timers/counters
48 I/Os
ADSP-BF536BBCZ-3A Applications
There are a lot of Analog Devices Inc. ADSP-BF536BBCZ-3A DSP applications.
- Geophysical processing
- Digital hardware
- Monitoring equipment
- Streaming music
- Vehicle electronics
- Vibration signal processing
- Speech processing
- Finite impulse response digital filters
- Financial signals
- Remote sensing image processing technology
