ADSP-BF537BBCZ-5A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 182-LFBGA, CSPBGA |
| Number of Pins | 182 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 182 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF537 |
| Pin Count | 182 |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Memory Type | ROM, SRAM |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.26V |
| Height | 1.21mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF537BBCZ-5A Overview
An electronic component available in package 182-LFBGA, CSPBGA.Packaging is provided in the form of Tray.With its association with Fixed Point, it is suitable for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.It is essential that -40°C~85°C is kept at a temperature that ensures proper operation of the machine.It refers to the analog voltage range of 2.50V 3.30V that may be input or output.This digital signal processor is part of the Blackfin? series.For its use, it has 182 terminations.It works with a voltage of 1.2V as a supply voltage.There are pins on the 182 component.182 pins can be found in its configuration.By using its base part number of ADSP-BF537, many related parts can be identified.A specific design is present for the device in order for it to operate at the frequency of 500MHz.It adopts Surface Mount as its mounting way.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.In this device, the minimum voltage is 800mV.There is a maximum voltage supply of 3.6V to this device.Its memory is capable of storing 132kB data.The 2 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.This processor core adopts the architecture of Blackfin.There are 48 I/Os on the device.The memory type it uses is ROM, SRAM.The device contains 16 pieces of information.
ADSP-BF537BBCZ-5A Features
Supplied in the 182-LFBGA, CSPBGA package
48 I/Os
ADSP-BF537BBCZ-5A Applications
There are a lot of Analog Devices Inc. ADSP-BF537BBCZ-5A DSP applications.
- Consumer electronic gadgets
- Biometrics
- Vehicle electronics
- Instrument modeling
- Audio compression
- Finite impulse response digital filters
- Automobile electronic gadgets
- Automatic analysis system of EEG or ECG
- Digital image processing, data compression
- Fourier transform
