ADSP-BF537KBCZ-6AV
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 182 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF537 |
| Pin Count | 182 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 132kB |
| RAM Size | 32kB |
| Memory Type | ROM, SRAM |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Height | 1.21mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 182-LFBGA, CSPBGA |
| Number of Pins | 182 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
ADSP-BF537KBCZ-6AV Overview
This is an electronic component with a 182-LFBGA, CSPBGA package.There is a packaging method of Tray provided with it.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.Voltages can be input or output within 3.30V's analog voltage range.This digital signal processor is part of the Blackfin? series.The use of it is terminated by 182.1.3V provides the supply voltage for it.Pins are present on the 182 component.The configuration of the device includes 182 pins.Based on its base part number of ADSP-BF537, many ralated parts can be found.The device operates at the frequency of 600MHz in accordance with a specific design.Mounting is accomplished using Surface Mount.The specific characteristics of this device can be categoriMicroprocessorsed within the Microprocessors subcategory.This device requires a minimum voltage of 2.7V.It is capable of receiving a maximum voltage of 3.6V.3.3V is the supply voltage for this device.Its memory can be used to store 132kB data.The 2 UART channels support synchronous serial communication with configurable data formats and rates.Blackfin-architecture is used in this processor core.ROM, SRAM is the type of memory it uses.This device stores 16 information.
ADSP-BF537KBCZ-6AV Features
Supplied in the 182-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
ADSP-BF537KBCZ-6AV Applications
There are a lot of Analog Devices Inc. ADSP-BF537KBCZ-6AV DSP applications.
- TVs
- Spectral density estimation
- Speech processing and recognition
- 3D tomography and imaging processing
- Boats
- Monitoring equipment
- Other sensor array processing
- Electronic information engineering
- Streaming videos
- Instrument modeling
