ADSP-BF544BBCZ-5A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992.C |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 533MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF544 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Interface | CAN, SPI, SSP, TWI, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 260kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Address Bus Width | 22 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 196kB |
| Height Seated (Max) | 1.7mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF544BBCZ-5A Overview
An electronic component available in package 400-LFBGA, CSPBGA.Packaging way Tray is provided.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The machine is mounted in the way of Surface Mount in order to facilitate its operation.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.The analog voltage range of 2.50V 3.30V refers to the voltage that can be input or ouput.There are several digital signal processors in the Blackfin? series, including this one.The terminations for its uses are 400.Using 1.25V as the supply voltage, it operates.Pins are located on the 400 component.In its configuration, it contains 400 pins.The base part number ADSP-BF544 allows identification of a wide range of related parts.It is specifically designed to operate with the frequency of 533MHz.Surface Mount is the method of mounting it.The characteristics of this device allow it to be placed in the subcategory of Microprocessors.Devices like this can be powered with as little as 900mV volts.3.6V is the maximum voltage that can be supplied to this device.Using this device, you can store 260kB data.In 3 UART channels, the data format and transmission speeds may be customi3ed for asynchronous serial communication.Blackfin architecture is used for this processor core.It is equipped with 152 I/Os.
ADSP-BF544BBCZ-5A Features
Supplied in the 400-LFBGA, CSPBGA package
152 I/Os
ADSP-BF544BBCZ-5A Applications
There are a lot of Analog Devices Inc. ADSP-BF544BBCZ-5A DSP applications.
- Radio detection and rangin systems
- Digital camera
- Geophysical processing
- Tomography technology
- Radar
- Speech processing and recognition
- Biomedical treatment
- Audio compression
- Signal processing for telecommunications
- Biomedical engineering
