ADSP-BF547MBBCZ-5M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| Type | Fixed Point |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF547 |
| Pin Count | 400 |
| Qualification Status | Not Qualified |
| Interface | SPI, SSP, TWI, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 324kB |
| Number of I/O | 152 |
| RAM Size | 64kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 4 |
| Number of PWM Channels | 11 |
| Number of I2C Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 260kB |
| Number of SPI Channels | 3 |
| Clock Rate | 533MHz |
| Height | 650μm |
| Length | 17.2mm |
| Width | 17.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF547MBBCZ-5M Overview
It is a kind of electronic component available in the 400-LFBGA, CSPBGA package.It is provided with a packaging way of Tray.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.The operation of the device at the temperature of -40°C~85°C TA ensures the normal operation of the device.The analog voltage range of 2.50V 3.30V refers to the voltage that can be input or ouput.This digital signal processor is included into the Blackfin? series.400 terminations are available for its use.The supply voltage is 1.25V.Pins are available for 400 components.In its configuration, it contains 400 pins.With its base part number of ADSP-BF547, many related parts can be identified.It is specifically designed to operate with the frequency of 600MHz.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.900mV is the minimum voltage that can be supplied to this device.The maximum voltage for this device is 3.6V.Its memory can be used to store 324kB data.In 4 UART channels, the data format and transmission speeds may be customi4ed for asynchronous serial communication.It is based on the Blackfin architecture.152 I/Os are included with the device.It uses ROM as its memory type.Embedded systems in this system use 3 SPI channels for short-distance communication.Ics can communicate with each other via 2 I2C channels.There are 11 PWM channels designed to control analog circuits with digital means.
ADSP-BF547MBBCZ-5M Features
Supplied in the 400-LFBGA, CSPBGA package
152 I/Os
ADSP-BF547MBBCZ-5M Applications
There are a lot of Analog Devices Inc. ADSP-BF547MBBCZ-5M DSP applications.
- Smart camera
- Biomedical engineering
- Vehicle electronics
- TVs
- Sound navigation and ranging systems
- Boats
- Biomedical treatment
- Infrared
- Instrument modeling
- Streaming music
