ADSP-BF548BBCZ-5A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-LFBGA, CSPBGA |
| Number of Pins | 400 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992.C |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 533MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF548 |
| Pin Count | 400 |
| Power Supplies | 1.22.5/3.3V |
| Interface | CAN, SPI, SSP, TWI, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 900mV |
| Memory Size | 324kB |
| RAM Size | 64kB |
| Memory Type | ROM, SRAM |
| Number of Bits | 16 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 11 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 2.50V 3.30V |
| Number of UART Channels | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.25V |
| On Chip Data RAM | 260kB |
| Height | 1.7mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF548BBCZ-5A Overview
This is an electronic component with a 400-LFBGA, CSPBGA package.The packaging way is Tray.With its association with Fixed Point, it is suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.At the temperature of -40°C~85°C TA, the device is guaranteed to operate normally.Voltages can be input or output within 2.50V 3.30V's analog voltage range.This digital signal processor is included into the Blackfin? series.The 400 terminations are used for its uses.Using 1.25V as the supply voltage, it operates.400 components have pins.This configuration contains 400 pins.There are a number of related parts that can be identified using the base part number ADSP-BF548.To operate at 533MHz frequency, the device has a specific design.A Surface Mount mounting method is used for its mounting.This device can be classified into the subcategory Microprocessors based on its specific characteristics.In order to power this device, a voltage as low as 900mV needs to be supplied.The maximum voltage supplied to this device amounts to 3.6V.Its memory can store 324kB data.Electricity is provided by 1.22.5/3.3V.Data formats and transmission speeds are configurable for 4 UART channels used for asynchronous serial communication.Time and external events are measured and counted with 11 timers/counters.Blackfin-architecture is used in this processor core.The memory type adopted by it is ROM, SRAM.16 information is stored on the device.
ADSP-BF548BBCZ-5A Features
Supplied in the 400-LFBGA, CSPBGA package
11 timers/counters
ADSP-BF548BBCZ-5A Applications
There are a lot of Analog Devices Inc. ADSP-BF548BBCZ-5A DSP applications.
- 3D tomography and imaging processing
- Image signal processing
- Smart phones
- House construction
- Medical imaging
- Streaming videos
- Remote sensing image processing technology
- Computer vision technology
- Boats
- Digital hardware
