ADSP-BF592BCPZ-2
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | Fixed Point |
| Additional Feature | ALSO OPERATES AT 2.5 AND 3.3 V TYP |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF592 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.47V |
| Interface | I2C, I2S, IrDA, PPI, SPI, SPORT, UART |
| Min Supply Voltage | 1.1V |
| Memory Size | 68kB |
| Number of I/O | 32 |
| Speed | 200 MHz |
| Memory Type | SRAM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.29V |
| On Chip Data RAM | 64kB |
| Clock Rate | 200MHz |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad, CSP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
ADSP-BF592BCPZ-2 Overview
In electronic terms, it is a type of component that comes in the package of type 64-VFQFN Exposed Pad, CSP .It has a packaging style of Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.It is mounted in the direction of Surface Mount as shown in the image below.It is recommended that the device operate at a temperature of -40°C~85°C to ensure its normal operation.As the name implies, the analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be inserted or removed.The Blackfin? series includes this digital signal processor.The terminations for its uses are 64.It operates with the supply voltage of 1.8V.There are pins on the 64 component.An overview of its configuration can be found in the section on 64 pins.With its base part number of ADSP-BF592, many related parts can be identified.It is specifically designed to operate with the frequency of 400MHz.Mounting is accomplished using Surface Mount.The specific characteristics of this device can be categoriMicroprocessorsed within the Microprocessors subcategory.In order to power this device, a voltage as low as 1.1V needs to be supplied.1.47V is the supply voltage for this device.In its memory, this device can store 68kB data.Data format and transmission speed are configurable on 1 UART channels for asynchronous serial communication.This electronic part can also provide additional features to ALSO OPERATES AT 2.5 AND 3.3 V TYP.Time and external events are measured and counted with 4 timers/counters.Blackfin-architecture is used in this processor core.32 I/Os are available on the device.It adopts SRAM as its memory type.
ADSP-BF592BCPZ-2 Features
Supplied in the 64-VFQFN Exposed Pad, CSP package
Operating supply voltage of 1.47V
4 timers/counters
32 I/Os
ADSP-BF592BCPZ-2 Applications
There are a lot of Analog Devices Inc. ADSP-BF592BCPZ-2 DSP applications.
- Speech signal processing
- Boats
- Financial signals
- Infrared
- Telephone conversations
- Signal processing for telecommunications
- Processing system
- Automatic analysis system of EEG or ECG
- Digital image processing, data compression
- Automobile electronic gadgets
