ADSP-BF609BBCZ-5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 349-LFBGA, CSPBGA |
| Number of Pins | 349 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 349 |
| Type | Dual Core |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF609 |
| Pin Count | 349 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.25V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, SPI, SPORT, UART/USART, USB OTG |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.19V |
| Memory Size | 32kB |
| Number of I/O | 112 |
| RAM Size | 256kB |
| Memory Type | FLASH, SRAM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of ADC Channels | 1 |
| Number of PWM Channels | 8 |
| Non-Volatile Memory | ROM (64kB) |
| On Chip Data RAM | 808K x 8 |
| Number of SPI Channels | 2 |
| Height | 1.11mm |
| Length | 19.1mm |
| Width | 19.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF609BBCZ-5 Overview
In electronic terms, it is a type of component that comes in the package of type 349-LFBGA, CSPBGA .Packaging is provided in the form of Tray.Due to its membership in Dual Core, it is ideally suited for a wide range of uses.The machine is mounted in the way of Surface Mount in order to facilitate its operation.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.Voltages can be input or output within 1.8V 3.3V's analog voltage range.It is a part of the Blackfin? series of digital signal processors.In terms of its uses, it has 349 terminations.It is supplied with voltage by 1.25V.Pins are available for 349 components.An overview of its configuration can be found in the section on 349 pins.Many related parts can be identified by using the ADSP-BF609 part number as a base.500MHz is a frequency at which the device operates according to a specific design.A Surface Mount mounting method is used for its mounting.The characteristics of this device allow it to be placed in the subcategory of Microprocessors.This device requires a minimum voltage of 1.19V.This device can handle a maximum voltage of 1.32V.In order for it to operate, 1.25V is the supply voltage.Data can be stored in this device's memory in 32kB format.Blackfin-architecture is used in this processor core.112 I/Os are available on the device.The memory type it uses is FLASH, SRAM.32 information is stored on the device.Short-range communication is achieved using 2 SPI channels in this embedded system.A 8 PWM channel controls analog circuits with digital signals.In an ADC, the 1 channel refers to the number of analog values that can be simultaneously read.
ADSP-BF609BBCZ-5 Features
Supplied in the 349-LFBGA, CSPBGA package
Operating supply voltage of 1.25V
112 I/Os
ADSP-BF609BBCZ-5 Applications
There are a lot of Analog Devices Inc. ADSP-BF609BBCZ-5 DSP applications.
- Biometrics
- Radio detection and rangin systems
- Image compression
- Audio signal
- Geophysical processing
- Real-time effects
- Finite impulse response digital filters
- Speech processing and recognition
- Telephone conversations
- Scene analysis technology
