BQ2002SNTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2002 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 500μA |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 0.25mA |
| Nominal Input Voltage | 6V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Programmable Features | Voltage |
| Current - Charging | Constant Pulsed |
| Battery Pack Voltage | 2V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ2002SNTR Overview
There is a package Tape & Reel (TR) available.It comes as part of the 8-SOIC (0.154, 3.90mm Width) package.Mounting type is Surface Mount.If you wish to ensure reliable performance, set the temperature to 0°C~70°C TA.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.For the device to be charged, there is Constant Pulsed current required.Based on the base part number BQ2002, it is possible to find related parts for this device.A total of 8 terminations can be found in it.The battery pack is set to 2V when it comes to the battery.The device has a total of 8 pins.There are various programmable features, such as Voltage.In order for it to work, it requires 8 pins.It appears that there are 1 channels available at this time.Batteries with 5V should be able to power it.An input voltage that is equal to 6V can be applied to it without any problem.With a 2A output current, the operation is conducted.The device falls under the Power Management Circuits subcategory.This circuit can function at a low supply voltage, such as 4VV.It was determined during the design process that Vsup (maximum supply voltage) should be set to 0.25mA.With respect to the power supply for the part, it is set to 5V.There is a minimum input voltage of 4V volts.A 500μA supply current is set on the gadget.As a rule of thumb, the supply voltage needs to be set to 5V for optimum efficiency.
BQ2002SNTR Features
Battery pack voltage of 2V
1 channels
Power Management Circuits subcategory
8-SOIC (0.154, 3.90mm Width) package
BQ2002SNTR Applications
There are a lot of Texas Instruments BQ2002SNTR Battery Chargers ICs applications.
- Battery backup applications
- Electric boat
- Opportunity charge
- Power tools
- Mobile lighting
- Electricity bank
- Personnel carriers
- Wearables
- Floor scrubber
- Solar charging
