BQ2003S-N
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 2.2mA |
| Nominal Input Voltage | 5.5V |
| Switcher Configuration | PUSH-PULL |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1234 |
| Switching Frequency | 300kHz |
| Programmable Features | Timer, Voltage |
| Current - Charging | Constant |
| Max Charge Current | 2A |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | BQ2003 |
| Pin Count | 16 |
| Output Voltage | 4.5V |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Operating Supply Current | 750μA |
| Output Current | 2A |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
BQ2003S-N Overview
I found it in the Tube package, which comes with everything you need.With this item, there is a 16-SOIC (0.295, 7.50mm Width) package that comes with it.The device's mounting type is Surface Mount.This is the right thing to do: set the temperature to 0°C~70°C TA.In order to provide its functionality, this device uses an analog IC called BATTERY CHARGE CONTROLLER.Charge the device by supplying it with Constant current.You can find this device's related parts by searching the base part number BQ2003.It has a total of 16 terminations.16 pins are on it in total.The unit is equipped with a number of programmable features, including Timer, Voltage.There are 16 pins necessary to make it work.An input voltage that is equal to 5.5V can be applied to it without any problem.With a 4.5V output voltage, high efficiency is possible.In order to operate, it must have a current of 2A at the output.It can function at as low a supply voltage as possible, such as 4.5V.During the design process, Vsup (maximum supply voltage) was set to 2.2mA.Voltage input must be at least 4.5V volts.The gadget's supply is running at 750μA volts.The device has an input voltage of 5V.The best efficiency can be achieved by setting the supply voltage to 5V.This part has a switching frequency of 300kHz and operates with this frequency.
BQ2003S-N Features
Switching frequency of 300kHz
16-SOIC (0.295, 7.50mm Width) package
BQ2003S-N Applications
There are a lot of Texas Instruments BQ2003S-N Battery Chargers ICs applications.
- High end, feature-rich consumer
- Tablets
- Home routers
- Marine buoy lights
- Battery backup applications
- Wearables
- Smart power strips
- Military equipment
- Charging cradle for wearable devices
- Man lift
