BQ24004PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24004 |
| Pin Count | 20 |
| Output Voltage | 8.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.5V |
| Nominal Input Voltage | 10V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 2 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant |
| Battery Pack Voltage | 8.4V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24004PWPRG4 Overview
I found it in the Tape & Reel (TR) package, which comes with everything you need.The product comes in the package of a 20-PowerTSSOP (0.173, 4.40mm Width).A mounting type of Surface Mount has been specified for this device.The best way to adjust the temperature is to set it to -40°C~70°C TA.The device relies on an analog IC called POWER SUPPLY SUPPORT CIRCUIT to operate.To charge the device, you need Constant current.A list of related parts can be found by searching for the base part number BQ24004.It has 20 terminations.For the battery pack, it is 8.4V.It is equipped with 20 pins.Among the programmable features are Current, Timer.It is necessary to connect the 20 pins during the installation process of this product.It appears that there are 1 channels available at this time.Batteries with a 5V voltage are compatible with it.This device can be operated at an input voltage of 10V without being damaged.High efficiency can be achieved with a 8.4V output voltage.A 1.2A output current is used for operation.A power supply voltage as low as 4.5V can be used for it and it will work as well as possible.The input voltage is set to 4.5V volts.It is also possible, with this device, to generate the additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE.
BQ24004PWPRG4 Features
Battery pack voltage of 8.4V
1 channels
Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE
20-PowerTSSOP (0.173, 4.40mm Width) package
BQ24004PWPRG4 Applications
There are a lot of Texas Instruments BQ24004PWPRG4 Battery Chargers ICs applications.
- Military equipment
- Automotive electronics
- Mobile router
- Pallet jacks
- Medical
- Golf carts
- Smart cameras
- Locomotive
- Cellphones
- Forklift
