BQ24005PWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24005 |
| Pin Count | 20 |
| Output Voltage | 8.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.5V |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 10V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 2 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant |
| Battery Pack Voltage | 8.4V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24005PWPG4 Overview
There is a package for Tube in which it can be found.There is a 20-PowerTSSOP (0.173, 4.40mm Width) package included with this item that you will need to take care of.In this case, the device is mounted in the way of Surface Mount.The temperature should be set to -40°C~70°C TA to ensure reliable performance.The functionality of this device is provided by an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The device requires Constant current to charge.Based on the base part number BQ24005, its related parts can be identified.As far as the terminations are concerned, there are 20.It is a 8.4V voltage for the battery pack.It has a total of 20 pins on it.In addition to Current, Timer, a variety of programmable features are available.It is necessary to connect the 20 pins during the installation process of this product.The number of channels available is 1.With 5V, you can use a battery to power it.The board is capable of handling a voltage input of zero volts.In the case of 8.4V, the output voltage is likely to produce high efficiency.In order to operate, an output current of 1.2A is used.Subcategory 0 is home to this device.A power supply voltage as low as 4.5V can be used for it and it will work as well as possible.In most cases, the maximum supply voltage (Vsup) is set to 1mA.There is a 4.5V volt minimum input voltage requirement.As well as the additional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE, this device can also be used to generate the same functionality.
BQ24005PWPG4 Features
Battery pack voltage of 8.4V
1 channels
Power Management Circuits subcategory
Addtional features of OPTIONAL TEMPERATURE OR INPUT-POWER MONITORING BEFORE AND DURING CHARGE
20-PowerTSSOP (0.173, 4.40mm Width) package
BQ24005PWPG4 Applications
There are a lot of Texas Instruments BQ24005PWPG4 Battery Chargers ICs applications.
- Floor scrubber
- Shop charger
- Smart power strips
- Pallet jacks
- Power tools
- Material handling
- Wireless headphones
- Battery backup applications
- Forklift
- Remote control toys
