BQ24010DRCRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 25.089328mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | bqTINY™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24010 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 1A |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 3V |
| Max Input Voltage | 16.5V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16.5V |
| Fault Protection | Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24010DRCRG4 Overview
It is contained in the package Tape & Reel (TR).There is a 10-VFDFN Exposed Pad package included with this item that you will need to take care of.Mounting type Surface Mount is chosen for the device.The best way to adjust the temperature is to set it to -40°C~125°C TJ.It uses an analog integrated circuit of type POWER SUPPLY SUPPORT CIRCUIT.The device cannot be charged without Constant - Programmable current flowing through it.According to the base part number BQ24010, its related parts can be found.The overall number of terminations that can be found in it is 10 as a whole.The device is equipped with a total of 10 pins.This device has a number of programmable features, including Current, Timer.There are a total of 10 pins that have to be connected for the product to function correctly.There are a total of 1 channels available for use in this application.Batteries with 4.5V should be able to power it.The device can withstand a supply voltage of 16.5V.In the case of 4.2V output voltage, there is a possibility of optimal efficiency.The output current is set to 1A in this case.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 3V.It was determined during the design process that Vsup (maximum supply voltage) should be set to 5mA.This electrical component is part of the bqTINY? series.Voltage input must be at least 3V volts.This device can accept up to 16.5V volts of input voltage.The maximum output supply voltage is reduced to 4.2V to fulfill the operation requirements.There is a reduction in the maximum output current during operation to 1A.
BQ24010DRCRG4 Features
1 channels
Power Management Circuits subcategory
10-VFDFN Exposed Pad package
BQ24010DRCRG4 Applications
There are a lot of Texas Instruments BQ24010DRCRG4 Battery Chargers ICs applications.
- Automotive/electrical vehicle
- Cellphones
- Electric tour bus
- Opportunity charge
- Forklift
- Man lift
- Digital camera
- Painting boat
- Military equipment
- Modern LA
