BQ24031RHLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | bqTINY™ III |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24031 |
| Pin Count | 20 |
| Output Voltage | 6V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1.5A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 16V |
| Fault Protection | Over Temperature, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.36V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24031RHLR Overview
If you are looking for it in the Tape & Reel (TR) package, then you have found it.In order to make it more convenient, it has been included in the 20-VFQFN Exposed Pad package.It appears that the device's mounting type is Surface Mount.It is best to set the temperature to -40°C~125°C TJ.An analog IC of POWER SUPPLY SUPPORT CIRCUIT is used in this device.The device requires Constant - Programmable current to charge.This part number BQ24031 can be used to find its related parts.In general, the number of terminations found within it is 20 as a whole.For the battery pack, it is 4.36V.The device has a total of 20 pins.Programmable features, such as Current, Timer, are available.For the product to work properly, 20 pins must be connected in order to make it work.Currently, there are 1 channels available.With a 16V supply voltage, it is capable of withstanding the operation of the device.There is a possibility of achieving optimal efficiency when the output voltage of the device is 6V.There is 1.5A output current when the device operates.The device you are looking at belongs to the subcategory of Power Management Circuits.This circuit can function at a low supply voltage, such as 4.35VV.There is 2mA voltage set in Vsup (maximum supply voltage).bqTINY? III series electrical components make up this component.A minimum input voltage of 4.3V volts is required for this device.
BQ24031RHLR Features
Battery pack voltage of 4.36V
1 channels
Power Management Circuits subcategory
20-VFQFN Exposed Pad package
BQ24031RHLR Applications
There are a lot of Texas Instruments BQ24031RHLR Battery Chargers ICs applications.
- Solar charging
- Smart cameras
- Charging cradle for wearable devices
- Fleet management
- Various chargers
- Trash compactors
- Electricity bank
- High end, feature-rich consumer
- Golf carts
- Floor scrubber
