BQ24050DSQT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24050 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Max Output Current | 800mA |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 6.45V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 800mA |
| Output Current | 800mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 3.5V |
| Max Input Voltage | 28V |
| Nominal Input Voltage | 6.45V |
| Min Output Voltage | 4.16V |
| Threshold Voltage | 6.65 |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24050DSQT Overview
It is included in the Tape & Reel (TR) package. The package that is included with it comes in the shape of a 10-WFDFN Exposed Pad.A Surface Mount mounting type is assigned to the device.Temperature 0°C~125°C TJ is recommended for reliable performance.In order to operate, the device relies on an analog IC named POWER SUPPLY SUPPORT CIRCUIT.To charge the device, you need Constant - Programmable current.By using the base part number BQ24050, related parts can be found for this device.As a whole, it contains 10 terminations.There are 10 pins on it, so it has a very simple design.There are various programmable features, such as Current.For the product to work correctly, 10 pins are required, and a connection to each pin is required.There are a total of 1 channels available for your use.It should be possible to run it from a 5V battery it should be able to run at all times.An input voltage that is equal to 6.45V can be applied to it without any problem.It is possible to achieve optimum efficiency in the case of a given output voltage of 4.2V.In order to operate, an output current of 800mA is used.There is one subcategory of this device, and it is Power Management Circuits.The device can operate at a voltage of 4.75V as low as possible.Input voltage minimum is 3.5V volts, which is a requirement of the device.There is 800mA current flowing through the gadget's supply.It can take a maximum input voltage of 28V volts.In order for the operation to be carried out successfully, a maximum output supply voltage of 4.2V is required.In the course of operation, the maximum output current is reduced to 800mA.
BQ24050DSQT Features
1 channels
Power Management Circuits subcategory
10-WFDFN Exposed Pad package
BQ24050DSQT Applications
There are a lot of Texas Instruments BQ24050DSQT Battery Chargers ICs applications.
- Personnel carriers
- Embedded automotive applications
- Instruments and meters
- Fleet management
- Drone
- GPS tracker
- TV sticks
- GPS portable devices
- Electric vehicles
- Charging cradle for wearable devices
