BQ24070RHLTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24070 |
| Pin Count | 20 |
| Output Voltage | 4.4V |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Max Output Voltage | 4.5V |
| Min Input Voltage | 4.3V |
| Max Input Voltage | 16V |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 16V |
| Fault Protection | Over Temperature, Reverse Current, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.5A |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24070RHLTG4 Overview
It is included in the Tape & Reel (TR) package for convenience.In the package 20-VFQFN Exposed Pad, there is a version of it.Mounting type for the device is Surface Mount.It is best to set the temperature to -40°C~125°C TJ.In order to operate this device, an analog IC of POWER SUPPLY SUPPORT CIRCUIT must be used.To charge the device, there is a requirement for Constant - Programmable current.It is possible to find the related parts of this device by looking at its base part number BQ24070.It is possible to find a total of 20 terminations.It is set to 4.2V for the battery pack.Pins 20 are included.Current, Timer, for example, can be programmed.At the maximum charging current, it has a rating of 1.5A.There are 20 pins necessary to make it work.It is possible to access 1 channels.16V supply voltage is not a problem for it.Ideally, when the output voltage of the device is set to 4.4V, you will be able to achieve the highest degree of efficiency.Operation is done using a 1A output current.There is a subcategory of Power Management Circuits for this device.This circuit can function at a low supply voltage, such as 4.35VV.2mA is set for Vsup (maximum supply voltage).As far as the input voltage is concerned, it has a minimum of 4.3V volts.There is a maximum input voltage of 16V volts that it can take.In order for the operation to be carried out successfully, a maximum output supply voltage of 4.5V is required.
BQ24070RHLTG4 Features
Battery pack voltage of 4.2V
1 channels
Power Management Circuits subcategory
20-VFQFN Exposed Pad package
BQ24070RHLTG4 Applications
There are a lot of Texas Instruments BQ24070RHLTG4 Battery Chargers ICs applications.
- Battery backup applications
- Mobile lighting
- TV sticks
- Conventional charge
- Man lift
- Energy harvesting
- Wearables
- Fast charge
- Various chargers
- Industrial
