BQ24113RHLRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | bqSWITCHER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24113 |
| Pin Count | 20 |
| Output Voltage | 4.2V |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 2A |
| Min Input Voltage | 4.3V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 2 |
| Switching Frequency | 1.1MHz |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 8.4V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24113RHLRG4 Overview
It is contained in the package Tape & Reel (TR).An included version of it is available in the package 20-VFQFN Exposed Pad.The device is mounted with mounting type Surface Mount.This is the right thing to do: set the temperature to -40°C~85°C TA.There is an analog IC of BATTERY CHARGE CONTROLLER used in this device.For the device to be charged, there is Constant - Programmable current required.Based on the base part number BQ24113, its related parts can be identified.In general, the number of terminations found within it is 20 as a whole.The battery pack has 8.4V.The device has a total of 20 pins.This feature allows for programmability, such as Current, Timer.During the installation process, this product requires the connection of 20 pins.With a 16V supply voltage, it is capable of withstanding the operation of the device.In the case of 4.2V, the output voltage is likely to produce high efficiency.The operation is performed with an output current of 2A.It can function at as low a supply voltage as possible, such as 4.35V.During the design process, Vsup (maximum supply voltage) was set to 5mA.It belongs to the bqSWITCHER? series of electrical components.Input voltage must be at least 4.3V volts in order to function.This part has a switching frequency of 1.1MHz and operates with this frequency.
BQ24113RHLRG4 Features
Battery pack voltage of 8.4V
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24113RHLRG4 Applications
There are a lot of Texas Instruments BQ24113RHLRG4 Battery Chargers ICs applications.
- Marine buoy lights
- Solar charging
- Digital camera
- Electrical Utility industry
- Truck dealers
- Floor scrubber
- Tablets
- Portable devices
- GPS tracker
- Portable medical equipment
