BQ24123RHLT
| Parameters | |
|---|---|
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | bqSWITCHER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24123 |
| Pin Count | 20 |
| Output Voltage | 8.4V |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 2A |
| Adjustable Threshold | NO |
| Min Input Voltage | 4.3V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 16V |
| Threshold Voltage | +3.3V |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 3 |
| Switching Frequency | 1.1MHz |
| Programmable Features | Current, Timer |
BQ24123RHLT Overview
The Tape & Reel (TR) package contains it.Located in package 20-VFQFN Exposed Pad, it can be found there.Device mounting type Surface Mount is specified.The best way to adjust the temperature is to set it to -40°C~85°C TA.In order for the device to function, an analog IC named POWER SUPPLY SUPPORT CIRCUIT must be used.To charge the device, a current of Constant - Programmable is required.This device's related parts can be found under the base part number BQ24123.It contains a total of 20 terminations.20 pins are included in the package.Features such as Current, Timer are programmable.In order for the product to be functional, it requires that you connect the 20 pins according to the instructions.The system currently provides 1 channels for the user to use.The device can withstand a supply voltage of 16V.There is a possibility of high efficiency if the output voltage is set to 8.4V.In order to operate, an output current of 2A is used.This device can work at as low a voltage as possible, such as 4.35V.Vsup (maximum supply voltage) is set to 5mA.There are several electrical components in the series bqSWITCHER?.There is a minimum input voltage of 4.3V volts.In this particular part, the switching frequency is set to 1.1MHz.A reduction in maximum output current to 2A occurs during operation.
BQ24123RHLT Features
1 channels
Switching frequency of 1.1MHz
20-VFQFN Exposed Pad package
BQ24123RHLT Applications
There are a lot of Texas Instruments BQ24123RHLT Battery Chargers ICs applications.
- High end, feature-rich consumer
- Mobile lighting
- TV sticks
- Industrial
- Portable devices
- GPS tracker
- Wearables
- Trash compactors
- Electricity bank
- Solar charging
