BQ24150YFFR
| Parameters | |
|---|---|
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24150 |
| Pin Count | 20 |
| Output Voltage | 4.44V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 1.2A |
| Adjustable Threshold | YES |
| Min Input Voltage | 4V |
| Supply Current-Max (Isup) | 5mA |
| Nominal Input Voltage | 6V |
| Threshold Voltage | +3.3V |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 3MHz |
| Programmable Features | Current, Timer, Voltage |
| Current - Charging | Constant |
| Charge Current - Max | 1.25A |
| Battery Pack Voltage | 4.44V Max |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
BQ24150YFFR Overview
The Tape & Reel (TR) package contains it.To make it easier for you, it is included with the 20-UFBGA, DSBGA package.In this case, the device is mounted in the way of Surface Mount.It is recommended to set the temperature to -40°C~85°C TA for reliable performance.To operate the device, an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT is used.To charge the device, you will need to supply it with Constant of current.The base part number BQ24150 can be used to locate related parts for this device.As far as the terminations are concerned, there are 20.For the battery pack, it is set to 4.44V Max.In total, it has 20 pins.It is possible to program features such as Current, Timer, Voltage.When charging current is maximum, it is rated at 1.25A.It operates on the basis of 20 pins.There are 1 channels available for this application.This should be able to operate off of a battery that has a voltage of 5V.There is no damage to the device if an input voltage of 6V is applied.In the case of 4.44V, the output voltage is likely to produce high efficiency.The operation is carried out with an output current of 1.2A.This device is a member of subcategory Power Management Circuits.Using a supply voltage as low as 4V will allow it to function.There is 5mA voltage set in Vsup (maximum supply voltage).When it comes to the part's power supply, it is set to 5V.Voltage input must be at least 4V volts.3MHz is the switching frequency of the part.
BQ24150YFFR Features
Battery pack voltage of 4.44V Max
1 channels
Power Management Circuits subcategory
Switching frequency of 3MHz
20-UFBGA, DSBGA package
BQ24150YFFR Applications
There are a lot of Texas Instruments BQ24150YFFR Battery Chargers ICs applications.
- GPS tracker
- PDAs
- Electronic dictionary
- Tablets
- Crosswalk marker lights
- Wireless power
- Power tools
- Industrial handhelds
- MP3, MP4 player
- Boat
