BQ24617RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24617 |
| Pin Count | 24 |
| Power Supplies | 5/28V |
| Number of Channels | 1 |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 10A |
| Adjustable Threshold | YES |
| Min Input Voltage | 5V |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | +3.85V |
| Fault Protection | Over Current, Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 ~ 5 |
| Switching Frequency | 600kHz |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 2.1V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24617RGER Overview
The package that has it is the Tape & Reel (TR) package.In order to make it more convenient, it has been included in the 24-VFQFN Exposed Pad package.Surface Mount is the mounting type of the device.The best way to adjust the temperature is to set it to 0°C~125°C TJ.In order for this device to function, it utilizes an analog integrated circuit called POWER SUPPLY SUPPORT CIRCUIT.If the device needs to be charged, it must be supplied with Constant - Programmable current.If you use the base part number BQ24617, you can look for related parts.There are no terminations in it at all.Batteries pack have 2.1V.The device has a total of 24 pins.Current, for example, can be programmed.During the installation process, this product requires the connection of 24 pins.Currently, there are 1 available channels.In order for the device to operate properly, the supply voltage should not exceed 24V.When the operation is completed, the output current is 10A.There is one subcategory of this device, and it is Power Management Circuits.It is capable of functioning at a voltage as low as possible, for example 5V voltage for this circuit is used.During the design process, Vsup (maximum supply voltage) was set to 5mA.It is set to 5/28V when it comes to the power supply for the part.There is a minimum input voltage of 5V volts.As far as switching frequency is concerned, the part runs at 600kHz.
BQ24617RGER Features
Battery pack voltage of 2.1V
1 channels
Power Management Circuits subcategory
Switching frequency of 600kHz
24-VFQFN Exposed Pad package
BQ24617RGER Applications
There are a lot of Texas Instruments BQ24617RGER Battery Chargers ICs applications.
- Charging cradle for wearable devices
- Truck dealers
- Tablets
- Portable speaker systems
- Automotive battery charger circuits
- Boat
- Instruments and meters
- Trash compactors
- Model aircraft
- Rental fleets
