BQ24702PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BQ24702 |
| Pin Count | 24 |
| Output Voltage | 2.5V |
| Max Output Current | 9.4mA |
| Number of Channels | 1 |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Current | 7.1mA |
| Adjustable Threshold | YES |
| Max Output Voltage | 5.013V |
| Min Input Voltage | 7V |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 28V |
| Min Output Voltage | 4.985V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 234 |
| Switching Frequency | 350kHz |
| Max Charge Current | 2A |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24702PW Overview
If you are looking for it in the Tube package, then you have found it.There is a 24-TSSOP (0.173, 4.40mm Width) package included with this item that you will need to take care of.There is a mounting type Surface Mount specified for the device.The best way to adjust the temperature is to set it to -40°C~85°C TA.Analog IC POWER SUPPLY SUPPORT CIRCUIT is responsible for implementing the device.The related parts of the base part number BQ24702 can be found by following the order of the base part number.It contains a total of 24 terminations.24 pins are attached to it.It operates on the basis of 24 pins.Channels are available in a total of 1.There is a possibility that it can be powered by a 18V battery.An input voltage of 28V can be applied to the device without damage.As long as the output voltage is set to 2.5V, then there is a possibility of optimal efficiency being achieved.In order to operate, an output current of 7.1mA is used.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.Using a supply voltage as low as 4.5V will allow it to function.It is configured to be 6mA for Vsup (maximum supply voltage).Voltage input must be at least 7V volts.This part has a switching frequency of 350kHz and operates with this frequency.To fulfill the operation requirements, the maximum output supply voltage is reduced to 5.013V.The maximum output current is reduced to 9.4mA in order to meet the operation conditions.
BQ24702PW Features
1 channels
Power Management Circuits subcategory
Switching frequency of 350kHz
24-TSSOP (0.173, 4.40mm Width) package
BQ24702PW Applications
There are a lot of Texas Instruments BQ24702PW Battery Chargers ICs applications.
- Drone
- Battery backup applications
- Mobile point-of-sale (mPOS) terminals
- Automotive/electrical vehicle
- Power tools
- Digital camera
- Home appliances
- MP3, MP4 player
- Smart cameras
- Cellphones
