BQ24765RUVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 34-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 34 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 34 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ24765 |
| Pin Count | 34 |
| Output Voltage | 19.2V |
| Max Output Current | 8.064A |
| Input Voltage-Nom | 20V |
| Interface | I2C |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 7V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Current | 4A |
| Max Output Voltage | 19.2V |
| Min Input Voltage | 7V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 12mA |
| Nominal Input Voltage | 24V |
| Min Output Voltage | 1.024V |
| Switcher Configuration | BUCK |
| Threshold Voltage | +4V |
| Fault Protection | Over Current, Over Temperature |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 2 ~ 4 |
| Switching Frequency | 700kHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 19.2V Max |
| Height | 1mm |
| Length | 3.5mm |
| Width | 7mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24765RUVT Overview
You can find it in the Tape & Reel (TR) package.It can be found in package 34-VFQFN Exposed Pad.Mounting type Surface Mount is chosen for the device.It is best to set the temperature to -40°C~125°C TJ.A analog IC of BATTERY CHARGE CONTROLLER has been used in the design of this device.If the device needs to be charged, it must be supplied with Constant - Programmable current.By using the base part number BQ24765, related parts can be found for this device.A total of 34 terminations can be found in it.For the battery pack, it is set to 19.2V Max.34 pins are on it in total.Product functionality is dependent on 34 pins.Withstanding a voltage of 24V, it is a reliable piece of equipment.When the output voltage is 19.2V, high efficiency is possible.In this case, the output current of the device is set to 4A.A supply voltage of 7V is suitable for it, because it can operate with a low supply voltage.During the design process, Vsup (maximum supply voltage) was set to 12mA.It has a 7V volt minimum input voltage.Input voltage is 20V.In this particular part, the switching frequency is set to 700kHz.It is important to note that the maximum output supply voltage for this operation must be set to 19.2V.It is possible to reduce the maximum output current to 8.064A when the operation is in progress.
BQ24765RUVT Features
Battery pack voltage of 19.2V Max
Switching frequency of 700kHz
34-VFQFN Exposed Pad package
BQ24765RUVT Applications
There are a lot of Texas Instruments BQ24765RUVT Battery Chargers ICs applications.
- Mobile router
- Home appliances
- Opportunity charge
- Wireless headphones
- Fleet management
- Robot
- Smart cameras
- Tablets
- Industrial lighting
- Crosswalk marker lights
