BQ25010RHLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Additional Feature | PFM MODE IS ALSO AVAILABLE |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ25010 |
| Pin Count | 20 |
| Output Voltage | 4.2V |
| Max Output Current | 500mA |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500mA |
| Max Output Voltage | 4.2V |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 6.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 6.5V |
| Switcher Configuration | BUCK |
| Fault Protection | Over Temperature |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1MHz |
| Programmable Features | Current, Timer |
| Current - Charging | Constant - Programmable |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ25010RHLR Overview
It comes in the package?of a Tape & Reel (TR). There is a 20-VFQFN Exposed Pad package included with this item that you will need to take care of.In this case, the device has a mounting type of Surface Mount.The best way to adjust the temperature is to set it to -40°C~125°C TJ.To operate the device, an analog IC called SWITCHING REGULATOR is used.It is necessary to supply the device with Constant - Programmable current in order to charge it.If you use the base part number BQ25010, you can look for related parts.Among its terminations, there are 20.The device has a total of 20 pins.Current, Timer are a programmable feature.For the product to work correctly, 20 pins are required, and a connection to each pin is required.With a 6.5V supply voltage, it is capable of withstanding the operation of the device.When the output voltage is 4.2V, high efficiency is possible.During operation, 500mA represents the output current.It is capable of functioning at a voltage as low as possible, for example 4.5V voltage for this circuit is used.There is a minimum input voltage of 4.5V volts.The part has 1MHz switching frequency.Input voltage is limited to 6.5V volts.It is also possible to generate additional features with this device that are similar to those of PFM MODE IS ALSO AVAILABLE.Voltage 4.2V is the maximum output voltage needed for this operation.In order to comply with the constraints, the maximum output current is reduced to 500mA.
BQ25010RHLR Features
Switching frequency of 1MHz
Addtional features of PFM MODE IS ALSO AVAILABLE
20-VFQFN Exposed Pad package
BQ25010RHLR Applications
There are a lot of Texas Instruments BQ25010RHLR Battery Chargers ICs applications.
- Laptops
- Modern LA
- Truck dealers
- MP3, MP4 player
- Portable devices
- Electric boat
- Industrial lighting
- Shop charger
- Forklift
- Military equipment
