BQ25015RHLT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 47.287005mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Additional Feature | PFM MODE IS ALSO AVAILABLE |
| Subcategory | Power Management Circuits |
| Technology | HYBRID |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ25015 |
| Pin Count | 20 |
| Output Voltage | 700mV |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Interface | USB |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 4.35V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 500mA |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 2mA |
| Nominal Input Voltage | 6.5V |
| Switcher Configuration | BUCK |
| Battery Chemistry | Lithium Ion/Polymer |
| Number of Cells | 1 |
| Switching Frequency | 1MHz |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.2V |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ25015RHLT Overview
It is included in the Tape & Reel (TR) package. We've included it in the 20-VFQFN Exposed Pad package so that it's easier to use.Device mounting type Surface Mount is specified.Temperature -40°C~125°C TA is recommended for reliable performance.This device makes use of an analog IC of SWITCHING REGULATOR.Providing Constant - Programmable current to the device is the only way to charge it.You can find this device's related parts by searching the base part number BQ25015.It is possible to find a total of 20 terminations.This battery pack has a voltage of 4.2V.With 20 pins on it, it has a very simple design.It requires pins 20 to function.It can be powered by a battery with 5V.The board is capable of handling a voltage input of zero volts.700mV output voltages can result in high efficiency.With an output current of 0, the operation is carried out.Subcategory 0 is home to this device.It is capable of functioning at a voltage as low as possible, for example 4.35V voltage for this circuit is used.There is 2mA voltage set in Vsup (maximum supply voltage).The part's power supply is set to 5V.Input voltage minimum is 4.5V volts, which is a requirement of the device.As far as switching frequency is concerned, the part runs at 1MHz.The additional features of PFM MODE IS ALSO AVAILABLE can also be generated with this device.To meet operation conditions, the maximum output current is reduced to 500mA.
BQ25015RHLT Features
Battery pack voltage of 4.2V
Power Management Circuits subcategory
Switching frequency of 1MHz
Addtional features of PFM MODE IS ALSO AVAILABLE
20-VFQFN Exposed Pad package
BQ25015RHLT Applications
There are a lot of Texas Instruments BQ25015RHLT Battery Chargers ICs applications.
- Military equipment
- GPS tracker
- Robot
- Drone
- Electric tour bus
- Rental fleets
- Automotive electronics
- Electrical Utility industry
- PDAs
- Solar charging
