BQ25070DQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | BQ25070 |
| Pin Count | 10 |
| Output Voltage | 3.5V |
| Number of Channels | 1 |
| Interface | USB |
| Max Supply Voltage | 28V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 3mA |
| Output Current | 1A |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 10.2V |
| Threshold Voltage | 3.5 |
| Fault Protection | Over Temperature, Over Voltage |
| Battery Chemistry | Lithium Iron Phosphate |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.5V |
| Height | 800μm |
| Length | 2mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ25070DQCT Overview
If you are looking for it in the Cut Tape (CT) package, then you have found it.A 10-WFDFN Exposed Pad package is included with this item as part of its contents.Amounting type Surface Mount is the one associated with the device.It is recommended to set the temperature to -40°C~85°C TA for reliable performance.To operate the device, an analog IC called POWER SUPPLY SUPPORT CIRCUIT is used.To charge the device, you need Constant - Programmable current.The base part number BQ25070 can be used to locate related parts for this device.It is possible to find a total of 10 terminations.It is a 3.5V voltage for the battery pack.The device is equipped with a total of 10 pins.The operation?are 10 pins.Currently, there are 1 available channels.Batteries with 4.5V should be able to power it.It is important that the supply voltage does not exceed 28V for the device to work properly.3.5V output voltages can result in high efficiency.In order to operate, it must have a current of 1A at the output.It is capable of functioning at a voltage as low as possible, for example 3.75V voltage for this circuit is used.Its supply carries 3mA current.
BQ25070DQCT Features
Battery pack voltage of 3.5V
1 channels
10-WFDFN Exposed Pad package
BQ25070DQCT Applications
There are a lot of Texas Instruments BQ25070DQCT Battery Chargers ICs applications.
- GPS tracker
- Power tools
- Various chargers
- Military equipment
- Shop charger
- Rental fleets
- Painting boat
- Electric lift car
- Forklift
- Home routers
