BTS500151TADATMA2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PART AVAILABLE IN UNIFIED; ALSO HAS EXTENDED SUPPLY FORM 5.3V TO 28V |
| Max Power Dissipation | 200mW |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 33A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 33A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 80 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 230 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 700 μs |
| Output Peak Current Limit-Nom | 39A |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 700 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.7mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
BTS500151TADATMA2 Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-263-7, D2Pak (6 Leads + Tab) contains it.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It consists of 6 terminations in total.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 33A.The supply voltage of 13.5V is conducive to high efficiency.This electrical component is part of the Automotive, AEC-Q100 series.In this case, the output current will be set to 33A.Normal operation requires Vsup above 8V.This LED driver can also produce PART AVAILABLE IN UNIFIED; ALSO HAS EXTENDED SUPPLY FORM 5.3V TO 28V.
BTS500151TADATMA2 Features
Supplied from 13.5V
Additional features like PART AVAILABLE IN UNIFIED; ALSO HAS EXTENDED SUPPLY FORM 5.3V TO 28V
BTS500151TADATMA2 Applications
There are a lot of Infineon Technologies BTS500151TADATMA2 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PC Cards
- Gaming
- Smartphone and PDA
- Notebook and Tablet Computers
- Wearable Devices
- Wireless/Networking Cards
- Telecom and Network Systems
- Hot Swap
- USB Protection
