banner_page

CD4013BCN

3V~15V 15.5MHz 2 Bit D-Type Flip Flop 4013 14 Pins 4μA 4000B Series 14-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-CD4013BCN
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 856
  • Description: 3V~15V 15.5MHz 2 Bit D-Type Flip Flop 4013 14 Pins 4μA 4000B Series 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Supplier Device Package 14-PDIP
Operating Temperature -55°C~125°C TA
Packaging Tube
Published 2002
Series 4000B
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type D-Type
Max Operating Temperature 125°C
Min Operating Temperature -55°C
Voltage - Supply 3V~15V
Frequency 15.5MHz
Base Part Number 4013
Function Set(Preset) and Reset
Output Type Differential
Number of Elements 2
Polarity Non-Inverting
Number of Circuits 2
Max Supply Voltage 15V
Min Supply Voltage 3V
Output Current 8.8mA
Number of Bits 2
Clock Frequency 15.5MHz
Propagation Delay 350 ns
Turn On Delay Time 65 ns
Logic Function AND, D-Type, Flip-Flop
Current - Quiescent (Iq) 4μA
Number of Inputs 1
Current - Output High, Low 8.8mA 8.8mA
Number of Gates 2
Number of Bits per Element 1
Max Propagation Delay @ V, Max CL 120ns @ 15V, 50pF
Trigger Type Positive Edge
High Level Output Current -4.2mA
Input Capacitance 5pF
Low Level Output Current 4.2mA
Number of Input Lines 1
Number of Output Lines 1
Clock Edge Trigger Type Positive Edge
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

CD4013BCN Overview


It is packaged in the way of 14-DIP (0.300, 7.62mm). The package Tubecontains it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Through Holeis in the way of this electric part. With a supply voltage of 3V~15V volts, it operates. It is operating at -55°C~125°C TA. It belongs to the type D-Typeof flip flops. The 4000Bseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 15.5MHz. D latch consists of 2 elements. There is 4μA quiescent consumption. This D latch belongs to the family of 4013. Input capacitance of this device is 5pF farads. The electronic part is mounted in the way of Through Hole. The 14pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is designed with a number of bits of 2. Despite its superior flexibility, it relies on 2 circuits to achieve it. With a current output of 8.8mA , it offers maximum design flexibility. In order to operate, the chip has 1 output lines. As of now, there are 1input lines. -4.2mAis set as the high level output current. It is set to 4.2mAfor low level output current. Temperatures below 125°Care ideal for operating. Ideally, the operating temperature should be greater than -55°C. The minimal supply voltage is 3V. The maximum supply voltage supported by the flip flop is 15V. It is possible to achieve 15.5MHz frequencies. The building block contains a total of 2 gates. There are 1 inputs involved.

CD4013BCN Features


Tube package
4000B series
14 pins
2 Bits
2 gates

CD4013BCN Applications


There are a lot of ON Semiconductor CD4013BCN Flip Flops applications.

  • High Performance Logic for test systems
  • Event Detectors
  • Supports Live Insertion
  • Individual Asynchronous Resets
  • Single Up Count-Control Line
  • Frequency Dividers
  • ESD performance
  • Count Modes
  • Patented noise
  • Set-reset capability

Write a review

Note: HTML is not translated!
    Bad           Good