CD4013BMG4
| Parameters | |
|---|---|
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
CD4013BMG4 Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). The package Tubecontains it. The output it is configured with uses Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A voltage of 3V~18Vis used as the supply voltage. Temperature is set to -55°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 4000B series. You should not exceed 24MHzin its output frequency. During its operation, it consumes 4μA quiescent energy. Terminations are 14. It is a member of the CD4013 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 5pF farads at the input. The electronic part is mounted in the way of Surface Mount. There are 14pins on it. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchbase part number family. Normally, the supply voltage (Vsup) should be kept above 3V. To achieve this superior flexibility, 2 circuits are used. In order for the chip to function, it has 1output lines. It consumes 20μA of quiescent current without being affected by external factors.
CD4013BMG4 Features
Tube package
4000B series
14 pins
CD4013BMG4 Applications
There are a lot of Texas Instruments CD4013BMG4 Flip Flops applications.
- Data transfer
- Convert a momentary switch to a toggle switch
- Shift registers
- Event Detectors
- Buffered Clock
- Control circuits
- Supports Live Insertion
- Shift Registers
- ESD performance
- ESD protection
