CD4027BCN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 3V~15V |
| Frequency | 15.5MHz |
| Base Part Number | 4027 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 3V |
| Number of Bits | 2 |
| Clock Frequency | 15.5MHz |
| Propagation Delay | 400 ns |
| Turn On Delay Time | 65 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8.8mA 8.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 130ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4.2mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 4.2mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4027BCN Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. Through Holemounts this electrical part. It operates with a supply voltage of 3V~15V. In the operating environment, the temperature is -55°C~125°C TA. There is JK Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 4000B series. You should not exceed 15.5MHzin the output frequency of the device. A total of 2 elements are present. There is a consumption of 4μAof quiescent energy. The 4027 family contains it. JK flip flop input capacitance is 5pF farads. There is an electronic part that is mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. The clock edge trigger type for this device is Positive Edge. It is designed with 2bits. Using 2 circuits, it is highly flexible. There are 1 output lines in this JK flip flop. As of now, there are 2input lines. High level output current is set to -4.2mA. It is set to 4.2mAfor the low level output current. Temperatures below 125°Care ideal for operating. In order for the system to operate properly, the temperature should be higher than -55°C. It operates with the minimal supply voltage of 3V. It supports the maximal supply voltage of 15V. It is possible to obtain a frequency of 15.5MHz.
CD4027BCN Features
Tube package
4000B series
16 pins
2 Bits
CD4027BCN Applications
There are a lot of ON Semiconductor CD4027BCN Flip Flops applications.
- Event Detectors
- Asynchronous counter
- Control circuits
- Count Modes
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Set-reset capability
- Test & Measurement
- ATE
- Communications
