CD4027BPWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4027 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.06mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4027BPWRG4 Overview
16-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). There is a Differentialoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A 3V~18Vsupply voltage is required for it to operate. Currently, the operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as JK Type. The FPGA belongs to the 4000B series. It should not exceed 24MHzin terms of its output frequency. As a result, it consumes 4μA quiescent current. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by CD4027, you will find similar parts. The power supply voltage is 5V. Input capacitance of this device is 5pF farads. The electronic part is mounted in the way of Surface Mount. This board is designed with 16pins on it. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. Normal operation requires a supply voltage (Vsup) above 3V. The superior flexibility is achieved through the use of 2 circuits. Due to its reliability, this T flip flop is well suited for TR. In terms of quiescent current, it consumes 20μA .
CD4027BPWRG4 Features
Tape & Reel (TR) package
4000B series
16 pins
CD4027BPWRG4 Applications
There are a lot of Texas Instruments CD4027BPWRG4 Flip Flops applications.
- Differential Individual
- Balanced 24 mA output drivers
- Convert a momentary switch to a toggle switch
- Automotive
- Single Down Count-Control Line
- Supports Live Insertion
- High Performance Logic for test systems
- Frequency Divider circuits
- CMOS Process
- Communications
