CD4076BE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | CD4076 |
| Function | Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Clock Frequency | 16MHz |
| Propagation Delay | 600 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 60 ns |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 6.8mA 6.8mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 180ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Schmitt Trigger | No |
| Input Current | 1μA |
| Number of Output Lines | 3 |
| fmax-Min | 8 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4076BE Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. You can find it in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. It operates with a supply voltage of 3V~18V. A temperature of -55°C~125°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 4000B series. In order for it to function properly, its output frequency should not exceed 16MHz. In total, it contains 1 elements. This process consumes 20μA quiescents. Currently, there are 16 terminations. The CD4076 family contains this object. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 5pF farads. A part of the electronic system is mounted in the way of Through Hole. This board has 16 pins. Its clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. A normal operating voltage (Vsup) should remain above 3V. The superior flexibility is achieved through the use of 2 circuits. It operates with 3 output lines. This D latch consumes 100μA quiescent current at all. In addition, WITH HOLD MODEis a characteristic of it.
CD4076BE Features
Tube package
4000B series
16 pins
CD4076BE Applications
There are a lot of Texas Instruments CD4076BE Flip Flops applications.
- Guaranteed simultaneous switching noise level
- High Performance Logic for test systems
- Balanced 24 mA output drivers
- Storage registers
- Synchronous counter
- Balanced Propagation Delays
- Cold spare funcion
- Common Clocks
- Memory
- Patented noise
