CD74AC112M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 100MHz |
| Family | AC |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| RoHS Status | Non-RoHS Compliant |
CD74AC112M Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tubepackage contains it. In the configuration, Differentialis used as the output. This trigger uses the value Negative Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.5V~5.5V volts. Currently, the operating temperature is -55°C~125°C TA. JK Typedescribes this flip flop. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 100MHzin its output frequency. There are 2 elements in it. There is 4μA quiescent consumption. 16terminations have occurred. The D flip flop is powered by a voltage of 5V . Its input capacitance is 10pF farads. A device of this type belongs to the family of AC. It reaches 5.5Vwhen the supply voltage is maximal (Vsup).
CD74AC112M Features
Tube package
74AC series
CD74AC112M Applications
There are a lot of Rochester Electronics, LLC CD74AC112M Flip Flops applications.
- Data Synchronizers
- Circuit Design
- Dynamic threshold performance
- Computers
- ESD performance
- Registers
- Control circuits
- Patented noise
- Safety Clamp
- Balanced 24 mA output drivers
