CD74AC175M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 4 |
| Clock Frequency | 100MHz |
| Propagation Delay | 153 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 3.1 ns |
| Family | AC |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 12.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC175M96G4 Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. With a supply voltage of 1.5V~5.5V volts, it operates. In this case, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74ACseries of FPGAs. It should not exceed 100MHzin terms of its output frequency. In total, it contains 1 elements. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AC175 family. The D flip flop is powered by a voltage of 3.3V . This JK flip flop has a 10pFfarad input capacitance. In terms of electronic devices, this device belongs to the ACfamily of devices. The electronic part is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. 4bits are used in its design. Vsup reaches its maximum value at 5.5V. On the basis of its reliable performance, this D flip flop is well suited for use with TR. A total of 3.3/5V power supplies are needed to run it. Its output current of 24mAallows for maximum design flexibility. A total of 4input lines have been provided. It consumes 8μA of quiescent current without being affected by external factors.
CD74AC175M96G4 Features
Tape & Reel (TR) package
74AC series
16 pins
4 Bits
3.3/5V power supplies
CD74AC175M96G4 Applications
There are a lot of Texas Instruments CD74AC175M96G4 Flip Flops applications.
- Computers
- Modulo – n – counter
- Circuit Design
- Matched Rise and Fall
- ATE
- Pattern generators
- Balanced Propagation Delays
- High Performance Logic for test systems
- Asynchronous counter
- Latch-up performance
