CD74AC374M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 135 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC374M Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 1.5V~5.5V volts, it operates. -55°C~125°C TAis the operating temperature. The type of this D latch is D-Type. It belongs to the 74ACseries of FPGAs. Its output frequency should not exceed 125MHz Hz. In total, there are 1 elements. A total of 20terminations have been recorded. Members of the 74AC374family make up this object. A voltage of 3.3V is used as the power supply for this D latch. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the ACfamily. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. It is part of the Bus Driver/Transceiverbase part number family. The design is based on 8bits. It reaches the maximum supply voltage (Vsup) at 5.5V. Its superior flexibility is attributed to its use of 8 circuits. The flip flop contains 2ports. Featuring the maximum design flexibility, it has an output current of 24mA . There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by external factors.
CD74AC374M Features
Tube package
74AC series
20 pins
8 Bits
CD74AC374M Applications
There are a lot of Texas Instruments CD74AC374M Flip Flops applications.
- Safety Clamp
- Frequency Divider circuits
- Test & Measurement
- Registers
- Supports Live Insertion
- Consumer
- Data storage
- Differential Individual
- Shift registers
- Synchronous counter
