CD74AC574E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 135 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.7 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC574E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. D flip flop is embedded in the Tube package. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. A supply voltage of 1.5V~5.5V is required for operation. It is operating at -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 125MHzshould be the maximum output frequency. D latch consists of 1 elements. There are 20 terminations,The 74AC574 family contains it. A voltage of 3.3V is used as the power supply for this D latch. A JK flip flop with a 10pFfarad input capacitance is used here. An electronic device belonging to the family ACcan be found here. In this case, the electronic component is mounted in the way of Through Hole. 20pins are included in its design. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number Bus Driver/Transceiver. It is designed with a number of bits of 8. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 24mA, it is possible to design the device in any way you want. There are 3 output lines on it. 8μAquiescent current consumed. A total of 8 channels are available.
CD74AC574E Features
Tube package
74AC series
20 pins
8 Bits
CD74AC574E Applications
There are a lot of Texas Instruments CD74AC574E Flip Flops applications.
- Counters
- Memory
- Patented noise
- Functionally equivalent to the MC10/100EL29
- QML qualified product
- Balanced Propagation Delays
- Dynamic threshold performance
- Computing
- Load Control
- Clock pulse
