CD74AC74M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC74M96G4 Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). This output is configured with Differential. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 1.5V~5.5V volts. The operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. In terms of FPGAs, it belongs to the 74AC series. It should not exceed 110MHzin its output frequency. A total of 14terminations have been recorded. D latch belongs to the 74AC74 family. A voltage of 3.3V provides power to the D latch. This JK flip flop has a 10pFfarad input capacitance. This D flip flop belongs to the family of AC. There is an electronic part that is mounted in the way of Surface Mount. 14pins are included in its design. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. As soon as 5.5Vis reached, Vsup reaches its maximum value. 2 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch runs on a voltage of 3.3/5V volts. As a result of its output current of 24mA, it is very flexible in terms of design. It has 1 output lines to operate. In terms of quiescent current, it consumes 4μA .
CD74AC74M96G4 Features
Tape & Reel (TR) package
74AC series
14 pins
3.3/5V power supplies
CD74AC74M96G4 Applications
There are a lot of Texas Instruments CD74AC74M96G4 Flip Flops applications.
- Registers
- Frequency Divider circuits
- Control circuits
- Frequency division
- Data transfer
- Test & Measurement
- Divide a clock signal by 2 or 4
- Differential Individual
- Counters
- Safety Clamp
