CD74ACT109M96
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 12.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.6 ns |
| Family | ACT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
CD74ACT109M96 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. Differentialis the output configured for it. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Temperature is set to -55°C~125°C TA. JK Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. It should not exceed 100MHzin its output frequency. There have been 16 terminations. You can search similar parts based on 74ACT109. Power is provided by a 5V supply. Input capacitance of this device is 10pF farads. An electronic device belonging to the family ACTcan be found here. Surface Mount mounts this electronic component. This board has 16 pins. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latch. In order to achieve its superior flexibility, 2 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. In order for the device to operate, it requires 5V power supplies. For high efficiency, the supply voltage should be kept at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. It consumes 4μA current.
CD74ACT109M96 Features
Tape & Reel (TR) package
74ACT series
16 pins
5V power supplies
CD74ACT109M96 Applications
There are a lot of Texas Instruments CD74ACT109M96 Flip Flops applications.
- Pattern generators
- EMI reduction circuitry
- Data Synchronizers
- Latch
- High Performance Logic for test systems
- QML qualified product
- Storage Registers
- Clock pulse
- Computers
- Dynamic threshold performance
