CD74ACT109ME4
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.6 ns |
| Family | ACT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
CD74ACT109ME4 Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -55°C~125°C TA. This electronic flip flop is of type JK Type. The FPGA belongs to the 74ACT series. You should not exceed 100MHzin the output frequency of the device. A total of 16 terminations have been made. The 74ACT109 family contains this object. A voltage of 5V provides power to the D latch. There is 10pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the ACTfamily. Electronic part Surface Mountis mounted in the way. With its 16pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. Despite its superior flexibility, it relies on 2 circuits to achieve it. The D latch operates on 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. The 24mA output current allows it to be designed with the greatest amount of flexibility. It consumes a total of 4μA quiescent current at any given time.
CD74ACT109ME4 Features
Tube package
74ACT series
16 pins
5V power supplies
CD74ACT109ME4 Applications
There are a lot of Texas Instruments CD74ACT109ME4 Flip Flops applications.
- Balanced 24 mA output drivers
- Circuit Design
- Data transfer
- Shift registers
- Reduced system switching noise
- Clock pulse
- Memory
- Cold spare funcion
- Consumer
- Dynamic threshold performance
