CD74ACT112M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 100MHz |
| Propagation Delay | 10.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.6 ns |
| Family | ACT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT112M Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. The package Tubecontains it. Currently, the output is configured to use Differential. There is a trigger configured with Negative Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. -55°C~125°C TAis the operating temperature. JK Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. There should be no greater frequency than 100MHzon its output. The number of terminations is 16. D latch belongs to the 74ACT112 family. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 10pFfarad input capacitance is used here. In this case, the D flip flop belongs to the ACTfamily. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 16 pins. It has a clock edge trigger type of Negative Edge. This device is part of the FF/Latchbase part number family. Despite its superior flexibility, it relies on 2 circuits to achieve it. It runs on 5Vvolts of power. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 24mA , it offers maximum design flexibility. There is 4μA quiescent current consumption by it.
CD74ACT112M Features
Tube package
74ACT series
16 pins
5V power supplies
CD74ACT112M Applications
There are a lot of Texas Instruments CD74ACT112M Flip Flops applications.
- Pattern generators
- Modulo – n – counter
- Differential Individual
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Circuit Design
- Counters
- Matched Rise and Fall
- Guaranteed simultaneous switching noise level
- Latch-up performance
