CD74ACT112ME4
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 100MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.3ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74ACT112ME4 Overview
The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). The Tubepackage contains it. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Negative Edgeis used. There is an electric part mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. Temperature is set to -55°C~125°C TA. This electronic flip flop is of type JK Type. In this case, it is a type of FPGA belonging to the 74ACT series. A frequency of 100MHzshould not be exceeded by its output. A total of 2 elements are present. As a result, it consumes 4μA quiescent current and is not affected by external forces. This T flip flop has a capacitance of 10pF farads at the input.
CD74ACT112ME4 Features
Tube package
74ACT series
CD74ACT112ME4 Applications
There are a lot of Rochester Electronics, LLC CD74ACT112ME4 Flip Flops applications.
- Individual Asynchronous Resets
- Consumer
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Control circuits
- Parallel data storage
- Load Control
- Asynchronous counter
- EMI reduction circuitry
- Power down protection
