CD74ACT175ME4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 114MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 11.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.9 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT175ME4 Overview
It is packaged in the way of SOIC. A total of 1elements are present in it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is provided by a 5V supply. An electronic device belonging to the family ACTcan be found here. Electronic part Surface Mountis mounted in the way. This board is designed with 16pins on it. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. As a result of its reliable performance, this T flip flop is suitable for TUBE. The D latch operates on 5V volts. The supply voltage should be maintained at 5V for high efficiency. Despite external influences, it consumes 8μAof quiescent current. The high level output current is set to -24mA. There is 24mA output current at the low level. Ideally, the operating temperature should be below 125°C. The operating temperature should be higher than -55°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It is capable of supporting a maximum supply voltage of 5.5V. The frequency that can be achieved is 114MHz. It uses the logic IC D FLIP-FLOP. It is equipped with 1 functions . It is equipped with 16 pins. In addition to its maximum design flexibility, the output current of the flip flop is 24mA.
CD74ACT175ME4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74ACT175ME4 Applications
There are a lot of Texas Instruments CD74ACT175ME4 Flip Flops applications.
- Set-reset capability
- Balanced Propagation Delays
- Patented noise
- Counters
- Supports Live Insertion
- Individual Asynchronous Resets
- QML qualified product
- Clock pulse
- Test & Measurement
- Load Control
