CD74ACT374E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 110MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | Non-RoHS Compliant |
CD74ACT374E Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Through Holemounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -55°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74ACT series. A frequency of 110MHzshould not be exceeded by its output. A total of 1elements are present in it. During its operation, it consumes 8μA quiescent energy. A total of 20terminations have been recorded. Power is supplied from a voltage of 5V volts. Its input capacitance is 10pFfarads. This D flip flop belongs to the family of ACT. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. A total of 2ports are embedded in the D flip flop.
CD74ACT374E Features
Tube package
74ACT series
CD74ACT374E Applications
There are a lot of Rochester Electronics, LLC CD74ACT374E Flip Flops applications.
- Buffered Clock
- Pattern generators
- High Performance Logic for test systems
- Differential Individual
- Bounce elimination switch
- Asynchronous counter
- Safety Clamp
- Storage registers
- Data Synchronizers
- Guaranteed simultaneous switching noise level
