CD74ACT574E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 110MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | Non-RoHS Compliant |
CD74ACT574E Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. It is included in the package Tube. Currently, the output is configured to use Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. The FPGA belongs to the 74ACT series. A frequency of 110MHzshould be the maximum output frequency. A total of 1 elements are present. Despite external influences, it consumes 8μAof quiescent current. There have been 20 terminations. A voltage of 5V is used to power it. Input capacitance of this device is 10pF farads. In terms of electronic devices, this device belongs to the ACTfamily of devices. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. The flip flop has 2embedded ports. Furthermore, it has BROADSIDE VERSION OF 374as a characteristic.
CD74ACT574E Features
Tube package
74ACT series
CD74ACT574E Applications
There are a lot of Rochester Electronics, LLC CD74ACT574E Flip Flops applications.
- Balanced Propagation Delays
- Common Clocks
- Counters
- Latch-up performance
- Synchronous counter
- Memory
- Bus hold
- Matched Rise and Fall
- Data storage
- Data transfer
