CD74ACT574EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 110MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74ACT574EG4 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. Temperature is set to -55°C~125°C TA. A flip flop of this type is classified as a D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. A frequency of 110MHzshould be the maximum output frequency. D latch consists of 1 elements. T flip flop consumes 8μA quiescent energy. The object belongs to the 74ACT574 family. Its input capacitance is 10pFfarads.
CD74ACT574EG4 Features
Tube package
74ACT series
CD74ACT574EG4 Applications
There are a lot of Texas Instruments CD74ACT574EG4 Flip Flops applications.
- Single Up Count-Control Line
- Event Detectors
- Balanced 24 mA output drivers
- Storage registers
- Instrumentation
- Frequency Dividers
- Computing
- Shift registers
- Dynamic threshold performance
- Bus hold
