CD74FCT273M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| fmax-Min | 70 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74FCT273M Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tube package. Currently, the output is configured to use Non-Inverted. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. In the operating environment, the temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. The 74FCTseries comprises this type of FPGA. A frequency of 70MHzshould not be exceeded by its output. A total of 1elements are contained within it. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74FCT273family make up this object. It is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. Electronic devices of this type belong to the FCTfamily. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. 8bits are used in its design. In order to achieve its superior flexibility, 8 circuits are used. An electrical current of 5V volts is applied to it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With an output current of 48mA, this device offers maximum design flexibility. This D latch consumes 8μA quiescent current at all.
CD74FCT273M Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT273M Applications
There are a lot of Texas Instruments CD74FCT273M Flip Flops applications.
- Data transfer
- Computing
- ATE
- Power down protection
- Latch-up performance
- Supports Live Insertion
- Instrumentation
- Guaranteed simultaneous switching noise level
- Convert a momentary switch to a toggle switch
- ESD performance
