CD74FCT374M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 48mA |
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 6.6 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 6.6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 15mA 48mA |
| Max Propagation Delay @ V, Max CL | 6.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74FCT374M Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. Package Tubeembeds it. It is configured with Tri-State, Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at 4.75V~5.25Vvolts. It is operating at a temperature of 0°C~70°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74FCT series. It should not exceed 70MHzin terms of its output frequency. There are 1 elements in it. A total of 20 terminations have been made. The object belongs to the 74FCT374 family. The power source is powered by 5V. There is 10pF input capacitance for this T flip flop. This D flip flop belongs to the family of FCT. This electronic part is mounted in the way of Surface Mount. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 8bits are used in this part. The superior flexibility of this product is achieved by using 8 circuits. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 48mA, it is possible to design the device in any way you want. It has 3 output lines to operate. 8μAquiescent current consumed.
CD74FCT374M Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CD74FCT374M Applications
There are a lot of Texas Instruments CD74FCT374M Flip Flops applications.
- QML qualified product
- Counters
- ESD protection
- Communications
- Matched Rise and Fall
- Individual Asynchronous Resets
- Patented noise
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Shift Registers
