CD74HC109M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC109M Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Tube. This output is configured with Differential. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -55°C~125°C TA. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 60MHzin the output frequency of the device. A total of 16terminations have been recorded. D latch belongs to the 74HC109 family. The power source is powered by 4.5V. Its input capacitance is 10pFfarads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Its output current of 5.2mAallows for maximum design flexibility. It consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.
CD74HC109M Features
Tube package
74HC series
16 pins
CD74HC109M Applications
There are a lot of Texas Instruments CD74HC109M Flip Flops applications.
- ESD performance
- Safety Clamp
- Divide a clock signal by 2 or 4
- Storage registers
- Convert a momentary switch to a toggle switch
- Load Control
- Shift Registers
- Power down protection
- Automotive
- Event Detectors
